IBM BladeCenter AMM settings for IBM Systems Director

The following are a number of recommended IBM BladeCenter Advanced Management Module (AMM) settings for both discovery/updates using IBM Systems Director.

TCP Command Mode Protocol

Set this value to at least 10 (my screen capture shows 20) before discovering your BladeCenter’s AMM with Director.   If you use an SSL certificate,  also set the Secure command mode value.

SNMP v3 Settings

Ensure the following two SNMP v3 is Enabled and the Access Type is set to Set

Systems Director TFTP Server

On your Systems Director server ensure your Update Manager TFTP server is enabled.
You should now be ready to not only discover/authenticate to your BladeCenter’s AMM, but also perform AMM firmware updates from Systems Director 6.x
Advertisements
  1. Leave a comment

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: